A pack of 100 Galvanised Steel wire "W" greenhouse clips which are used for holding either glass or polycarbonate into an aluminium greenhouse. These are the clips used by our experienced glaziers when replacing glass in customers greenhouses.

This Eden Greenhouse Glazing strip is 31 metres in length and is suitable for use with Eden greenhouses. The glazing strip is designed to sit between the glass and aluminium, stopping the glass from touching the aluminum.

Features include;

• 31m roll of rubber greenhouse glazing strip
• Suitable for Eden and Europa Manor greenhouses
• 3mm high and 3mm wide (1/8th")
• A 4x6 greenhouse uses 45metres, a 6x6 uses 54meatres and an 8x6 uses 64metres of strip
• Easy installation

This greenhouse repair kit consists of

• x100 Galvanised W Clips
• x100 Stainless Steel Z Overlap Clips
• x100 Aluminium Cruciform Nuts and Bolts

The clips are used to hold either 3mm or 4mm glass, acrylic and polycarbonate into a greenhouse. The clips will fit the majority of greenhouses however there are some exceptions. The W clip fixes into the side of the aluminium channel holding the glass in place, traditionally there are four clips to each pane of glass sized (610m x 610mm, 2ft x 2ft) however extra clips can be added to try and prevent wind damage. The Stainless Steel Z clips are used in the walls and roof when stacking panes of glass on top of each other, normally two Z clips are placed on each joint. The overlap size of the clips is 12mm. The cruciform bolts are used during the construction of the greenhouse they have a 10mm square head with a cross shape on top. The thread on the bolt is M6 and thread length is 11mm.